Free store pick up 
Immediate availability 
Free delivery over 30€ 
Shipping in 24 hours 
Are you a professional?
EcoFlow Relay Module 13A for Smart Home Panel 2pcs
The EcoFlow relay module 13A integrates seamlessly with the Smart Home Panel of EcoFlow. This panel enables connectivity for up to 10 home circuits for backup power, with different current ratings for different connected loads. Each module has two modules and an overcurrent protection fuse for each circuit. That means you can swap one out without affecting the other circuits. If you need to swap a relay module, the EcoFlow app and the on-unit LED will notify you of any errors.
The selection and installation of relay modules must be from consulting your electrician.
EcoFlow Relay Module
How to Choose
-Load planning: With a Smart Home Panel, selective loads are installed where they will be the most effective during power outages or energy savings management. Consider areas that would significantly affect comfort, such as refrigerator and lights, and choose a maximum of 10 selective loads from your breaker panel based on their efficiency in load.
-Collect the load info: Determine the number and current rating of the load circuits that you plan to connect. Consult your electrician if you need support with this.
-Determine the relay modules needed: Choose the relay module that matches the current rating for the circuit breaker upstream of that load circuit. Recommended relay modules for regions: 13A, 16A, 30A for EU.
How to Install
STEP 1
Remove the screws on the bottom, side, and top of the Smart Home Panel to remove the front of it.
STEP 2
Contractors have installed the relay module at the spot that corresponds to the circuit they plan to use.
STEP 3
Secure the relay module by tightening the two screws.
| Brand | EcoFlow |
|---|---|
| Certification | C.E, F.C.C, RoHS |
| App Compatible | No |
